Dremme Dogs: A Beginner’s Guide: If you want your dog to be happy and healthy, it is absolutely necessary for you to demonstrate that you are able to properly trim the nails of your dog. However, even in the most favorable of circumstances, the act of providing your pet with a pedicure can be an intimidating proposition. To our great relief, assistance is not too far away.
Dremme Dogs: A Beginner’s Guide
The fundamentals of properly trimming pet nails are covered in this guide for beginners, which includes instructions on how to handle the paws, how to prepare the electric pet nail grinder from Dremel, and what angle to work at. In the process of grinding, you will acquire the much-required self-assurance that you require by gaining an understanding of the maximum distance that you can go without causing harm to your dog. In order to discover that perfecting the nails of your pet does not have to be a stressful experience, you should not be afraid to give it a shot and discover that it is possible.
Let’s go – step by step
1.Prepare the Electric Pet Nail Grinder
Does this happen to be your very first time using the Pet Nail Grooming Kit from Dremel? All you need to do is remove it from its packaging, put in some batteries, and you’ll be good to go. In the event that you have previously utilized it, you might want to thoroughly clean it or replace the sanding disc. In order to get the tool ready for use, you should do the following:
- Remove the nail guard.
- Pull the mandrel down and remove the old sanding disc.
- Pull the mandrel down again while attaching the new sanding disc.
- Open the grey section of the nail guard, clasp it shut around the mandrel and screw it into place.
- Slot the transparent part of the nail guard into place and turn until it clicks.
2.Find a Comfortable Position to Trim Your Dog’s Nails
- Find a place where you and the dog can sit comfortably before beginning the process of trimming your dog’s nails. This will ensure that the process goes smoothly. To ensure that you are able to easily reach all of your dog’s paws without having to twist its legs, it is essential to position your dog in such a way that allows you to do so. By way of illustration, you might give the sofa a shot.
- The first thing you should do is place a towel on your lap, and then you should ask your dog to place its front paws on the towel. Through this method, you are able to maintain a firm grip on the paw while simultaneously ensuring that it is visible to everyone.
- Instead of sitting in the opposite direction from their animal companion, some people who own pets find that it is more convenient to face in the same direction as their animal companion. You will quickly discover which position is the most comfortable for both you and your dog if you are willing to put in some effort and experiment with different positions both of you can try.
3.Introduce Your Pet to the Electric Nail Grinder
- Before beginning your pet pedicure, you should first familiarize the dog with the electric pet nail grinder and the task that is going to be performed. You should begin by lightly touching its paws. Make sure that your pet is comfortable with that, and then proceed to give the paws a light rub afterward.
- During the time that you pet the dog and reassure it, allow it to sniff and touch the tool for a minute. Once you have done that, turn the tool on a few times without trimming any of your dog’s nails just yet. The humming sounds and vibrations that the tool produces will become more familiar to him or her as a result of this situation. This dog is very courageous and is prepared to be groomed.
4.Determine How Short You Want the Nail to Be
- The next step is to carefully examine the nails of your dog. Find the pink, living part known as the quick, which is the location where the nerves and blood vessels are located. Due to the fact that cutting into this part causes your dog to yelp in pain and the nail to bleed, you should avoid this area as much as possible. It may be difficult to spot the quick if your dog has nails that are black in color.
- Instead, locate the point on the underside of the nail where it divides into a triangular shape with two outer ‘walls’ and then proceed to remove the nail. This is the point at which you should cut the nail, and you should be safe. In order to achieve a result that is relatively straight, you should remove the pointed tip of the nails so that they do not touch the floor when the dog is standing.
5.Turn on the Tool and Start Trimming Your Dog’s Nails
- Using the hand that is not your dominant hand, firmly grasp a paw. To separate the toe and encourage the nail to stand out, apply a light pressure to the toe. When you turn on the tool, the low setting is ideal for keeping your nails short, while the high setting, if your dog is willing to allow it, is an incredible tool for maintaining long nails.
- Hold the tool at an angle of 45 degrees, place the paw pad on the guard, and bring the nail into contact with the sanding disc all at the same time. The angle ensures that you will adhere to the natural shape of the nail, while the guard eliminates the possibility of your dog’s fur getting in the way and safeguards your pet in the event that it is unable to remain still. Instead of applying too much pressure to the nail, you should let the tool do the work for you.
6.Have Little Breaks During Pet Nail Grooming
- Are you interested in ensuring that your dog is comfortable throughout the pet nail grooming session? Make sure to take brief breaks in between. In light of the fact that grinding generates friction, which in turn generates heat, taking a break will prevent the sanding disc from overheating, which would otherwise result in a burning sensation in the nail. Taking a break every once in a while also provides you with the opportunity to reassure and praise your dog.
- You should give him or her a tasteful treat or a hug because it is well deserved. During the break, you should carefully examine the nail. For how much longer does it take to grind away? Are you steering clear of the pink quick as much as possible? After you have determined how much more trimming is required, you will proceed with the next step.
7.File the Dewclaws’ Nails Too
- Dewclaws, also known as thumbs, are located on the front legs of every dog. There are also dogs that have them on their hind legs, and some of them even have double dewclaws or even more than one.
- These additional toes are located a little higher up on the leg, and their nails also need to be trimmed. In point of fact, the nails on your pet’s dewclaws can grow more quickly than the nails on the rest of their nails, which is why it is essential to keep a close eye on them from week to week.
- When trimming the nails of dewclaws, it is beneficial to remove the nail guard because the nails on dewclaws can be a little more difficult to access. It is simple to trim the nails; all you need to do is file away the pointed tip.
8.Check the Length of Your Pet’s Nails after Trimming
- As soon as you have finished filing all of the nails on all of the paws, it is time to examine the results of your labor. Do the nails of your dog continue to be excessively long, or is it time to call an end to the pet nail grooming session before it’s too late?
- Request that your canine companion stand on all four legs on a level, hard surface, and examine each of the individual nails. When they are no longer touching the ground, this indicates that they have been trimmed sufficiently.